Call for a free inspection!

Atlas Restoration LLC | A Chicago Best Pick Company

Our Blog

Why Convert a Crawl Space to a Basement

Do any of these questions apply to you?

  • Is your home feeling a bit cramped?
  • Are you unable to host friends and family in your home due to lack of space?
  • Do you need a place for the kids to play?
  • Are you without a clean, organized storage space for your more precious belongings?
  • Do you have a place to go if a natural disaster occurs, such as a tornado or hurricane?

Here at Atlas Restoration we know that If any of these questions apply to you, your best option is to convert your current crawl space into a basement. Converting your crawl space to a full-depth basement is a time trusted technique that saves you from buying a new home to accommodate your family's need for extra space. Click on the following link for more information about converting your crawl space into a basement:

Crawl Space to Full Basement Conversion

If your existing home is built with a crawl space, we can create a full-height basement! Here's how the process works:

  • First, a ramp is excavated to provide access to the work area.
  • Then, the soils are removed beneath the home.
  • Next, the existing foundation is underpinned for additional support.
  • New footings and foundation walls are installed.
  • Then a drain tile system and stone base are installed.
  • Next, a concrete floor is poured.

Voila! You're ready to furnish and expand your living area. Click on the following link to learn more about crawl space to full basement conversion or to schedule your free inspection and evaluation

Is My House Sinking?

I get asked this question all the time and chances are good that, if anything, only a small portion of your home is sinking.

Signs That Your House May Be Sinking

  • Cracked drywall
  • Cracked bricks or masonary headers
  • Cracked sill plates
  • Doors or windows that stick or do not open

Want to make sure that your house is safe from potentially dangerous sinking? An Atlas Restoration expert will come straight to your home to provide you with a free evaluation.

To learn more about sinking homes or to schedule your free inspection visit

Should I Insulate My Home With AtlasFoil?

If you have an older home, built twenty or more years ago, then your home likely doesn't have added or effective insulation. In fact, a recent survey shows that only 20% of homes built after 1980 are properly insulated. 

If your home seems uncomfortably hot in the summer, or too cold in the winter, insulation helps to creaste a more uniform temperature, increasing you and your family's comfort. Atlas Restoration uses a special AtlasFoil installation material that ensures the very best insulation for your home, all year round.

For a free estimate of your home's insulation needs, call Atlas Restoration today.

Ask An Expert: Do I Need AtlasFoil If My Attic is Already Insulated?

Professor Charles Shabica from Northeastern Illinois University says: "Reflective foil retrofitted to fiberglass insulated buildings is demonstrably effective in reducing heat loss... Insulation of foil in uninsulated buildings would show even more pronounced reduction in heat loss."

To learn more about AtlasFoil reflective insulation, visit:

What is the "R" value of a radiant barrier such as AtlasFoil?

From Energy Design Update newsletter, the leading resource for developments and news related to energy-efficient construction and residential design: 

"One of the most surprising results obtained in the FSEC tests was the mutually enhancing effect of RBS's and attic ventilation. When they measured the "apparent R-value" of ventilated attic systems with and without radiant barriers, they came up with values of R-68 with the RBS and R-38 without RBS! ("Apparent R" is calculated from the temperature difference across the whole attic, from roof surface to ceiling below.)" (Energy Design Update, March 1986, Vol.5, No. 3).

To learn more about AtlasFoil insulation click on the following link:

What is Radiant Barrier Foil Insulation?

Foil insulation is typically installed in home attics to help reduce utility bills. Radiant barrier is preferred over other types of insulations because foil insulation reflects heat back to its source, while other types of insulation only slow down the transfer of heat. In a standard residential home, installing foil insulation in your attic can stop 95-97% of the radiant heat that hits its surface. More than that, foil insulation resists heat in the summer months and reduces heat loss during winter months.

How Does AtlasFoil Work in My Attic?

What Are Radiant Barriers?

Radiant barriers reduce heat transfer across air space between the attic floor and the roof deack by thermal radiation. All materials give off, or emit, energy by thermal radiation as a result of their temperature. On a warm, sunny day, solar energy is absorbed by the roof, heating the sheathing on the roof, causing sheathing's underside and the framing on the roof to radiate heat on a downward path to the attic floor. The installation of radiant barriers deflects the roof's heat back in the direction of the roof. This prevents unecessary amounts of heat from entering the house through the roof. In the winter months, radiant barriers may also lower indoor heat loss through the ceiling. Radiant barriers reduce the amount of energy radiated from the top surface of the insulation.

To find out more about AtlasFoil, click on the following link:

Attic Foil Blocks Heat Transfer, Keeping House Cooler

Expert Jim Dulley Answers A Client's Pressing Question About Attic Foils: 

Dear Jim: I have plenty of fiberglass insulation on the attic floor, but it still seems as though the bedroom ceiling is warm on sunny days. What can I do to keep it cooler? - Steve P.

Dear Steve: If you put your hand against the ceiling, you will be surprised by how warm it actually is. What you are experiencing is radiant heat transfer from the hot roof to the ceiling below. A dark roof can reach 150 degrees in the afternoon sun. Standard fiberglass insulation is effective for blocking conductive heat transfer, but not for radiant heat. Radiant heat from the roof penetrates through the insulation to the ceiling below. Even the insulation gets warm. The best method to block most of the heat is to install reflective foil underneath the roof and install adequate attic ventilation. The foil will block the direct path of the radiant heat to the ceiling below. The attic ventilation will cool the roof and carry the excess hot air away. In my own home, this combination lowered my bedroom temperature by 10 degrees. Attic foil is commonly referred to as reflective foil because it looks reflective. It actually works not by reflecting the heat back up to the roof, but by its low-emissivity (similar to low-e windows). The foil gets hot, but its shiny, low-e surface does not easily radiate the heat downward.  (

Summary of Atlas Resistance® Piers

The Atlas Resistance® Pier two-stage product manufactured and designed specifically to produce structural support strength.

How Atlas Resistance Piers Are Set: 

  • First, the Pier Pipe is driven to a firm bearing stratum
  • The lift equipment is then combined with a manifold system to lift the structure. 
  • Atlas Resistance® Piers are spaced at adequate centers where each pier is driven to a suitable stratum and then tested to a force greater than required to lift the structure. 

Click on the following link to learn more about the Atlas Resistance® Piers or to schedule a free foundation inspection and evaluation: